Structural reinforcement refers to strengthening the original stressed structure, so as to meet the new requirements and safety, and save costs and reduce investment.
The existing concrete structure is affected by various factors such as natural environment and use environment. It shows different degrees of defects such as insufficient bearing capacity and large denaturation. Structural reinforcement refers to strengthening the original stressed structure, so as to meet the new requirements and safety, and save costs and reduce investment.
1. the function of the original building is changed, and some structural members need reinforcement.
2. due to design alteration or construction errors, reinforcement and reinforcement of partial location are needed for in construction projects.
3. the original building is added to the roof or indoor. Due to the increase of load, the related structural components need reinforcement.
4. the existing buildings are in extended service, but there are no conditions to demolish and rebuild the buildings. The main body needs reinforcement.
5. the original parts in the building are obstructing the use and need to be demolished. The transmission way of the original structure is changing and needs reinforcement.
6. new mechanical and electrical equipment, elevators, escalators and other equipment will be added to the building. The load will increase until the equipment foundation is increased, so we need reinforcement.
7. the plane position of elevator and staircase has changed. The original staircase is demolished, and the openings and new openings of the sealing floors need reinforcement.
1. carbon fiber reinforcement method
CFRP reinforcement is a new type of structural reinforcement technology. It uses resin cementing material to paste CFRP on the surface of concrete, and forms a whole force system with the structure to enhance the bending or shear ability of the reinforced structure, so as to achieve the purpose of strengthening and strengthening the structure and improving the mechanical properties of the structure.
2. enlarging section reinforcement method
The enlarging section reinforcement method is to increase the bearing capacity by adding the reinforced bar of the original component and adding the concrete on the outside to increase the section size of the member. The advantage is that it can increase the stiffness, bearing capacity and deformation capacity of the components, and in some cases, it can also enhance the reliability of the connection. Therefore, it is widely used to reinforce the beam and slab structure and column structure of reinforced concrete structure. The reinforced concrete may be in the tension zone, which can play a binding and protective effect on the reinforced bar; it may also be in the compression zone, increase the effective height of the component, thus improve the flexural and shear bearing capacity of the component, strengthen the stiffness of the component, and improve the force capacity of the component.
3. prestressing reinforcement method
The method of prestressed reinforcement is to reinforce the structure with prestressed carbon fiber sheet. It can improve the bearing capacity of normal section and oblique section of structural members almost without changing the space of use. At the same time, it can effectively eliminate or slow down the stress lag phenomenon of the rear member, reduce the width of the crack of the original beam, and even make it completely closed.
4. bonded steel reinforcement method
The adhesive steel reinforcement method is a kind of reinforcing method to improve the bearing capacity and deformation ability of the structure with a special building structure adhesive on the surface of the reinforced concrete member. The advantage of this method is simple and fast, and its influence on production activities and residents' life is relatively small during construction. The externally bonded steel plate reinforcement method is often used to reinforce the reinforced concrete members subjected to static loads.
Carbon fiber fabric, CFRP strip, steel plate adhesive, prestressed CFRP plate, structural pouring glue, anchoring adhesive, crack repair adhesive, crack injection adhesive and so on. They aim at different structural defects.
Vous pouvez trouver tout ce dont vous avez besoin ici, avoir confiance en essayant ces produits, vous trouverez la grande différence après cela.
HM-20 est un tissu de fibre de carbone unidirectionnelle. Lorsque mis en place par superposition d’épaisseurs du tissu sur la résine d’imprégnation époxyde HM-180C3P, il forme un système de renforcement composite.
Lamelles en fibres de carbone est une lamelle de composite polymère extrudé par tirage et renforcé de fibres de carbone (CPFC), destiné au renforcement des structures de béton, de bois et de maçonnerie.
Renfort carbone par lamelle précontrainte, ce nouveau procédé permet de traiter des ouvrages, en béton armé ou précontraint, présentant une déformation trop importante ou un manque très important de rigidité.
Langue: current_language
