Bonded steel plate reinforcement method

In construction, the steel plate will be attached to the outer edge of the stressed part of the reinforced structure with structural steel plate bonding adhesvie​, in order to give full play to the strength and effect of the steel plate, and to close the cracks in the pasted parts at the same time, to restrain the deformation of the concrete, and thus effectively improve the crack resistance and stiffness of the reinforced component.

2018-06-27 17:54:17

Cracks in reinforced concrete(RC) structural members

Structural cracks not only represent the structural stress, but also affect the durability of structures. The bigger the crack width is, the easier the steel will corrode, which means that the bond between the steel bar and the concrete has been completely destroyed and the service life has come to an end.

2018-06-27 17:01:31

Reinforcement method of masonry structure

The practical masonry structure reinforcement can be divided into two types: direct reinforcement and indirect reinforcement. According to the actual conditions and the requirements of application, the suitable method can be selected.

2018-06-20 17:25:37

Slab, column, beam, wall strengthening

Slab strengthening, column strengthening, beam strengthening, wall strengthening, seismic strengthening.

2018-06-20 16:48:16

Strengthening method of beam column slab component

Concrete beams and slab members are the most widely used structural members in the current project. The flexural members of beams and slabs are strengthened by insufficient bearing capacity, including two aspects of the positive and inclined section.

2018-06-14 15:36:46

Enlargement section method to reinforce flexural members

Enlarging section reinforcement method Application: Reinforcement for flexural and compressive members of reinforced concrete(RC) structures.

2018-06-12 17:47:53

Principles should be followed in the treatment of concrete crack

Identify the nature of cracks; Ensure structural safety; Ensure durability;Prevent unnecessary damage; Improve the conditions of structural use, eliminate the factors causing cracks; Meet the design requirements and comply with the relevant provisions of the standard specification.

2018-06-12 17:09:57

Summarize the methods of bridge strengthening

Pre-stressing FRP reinforcement method; Carbon fiber reinfroced polymer(CFRP) compsoite strengthening method

2018-06-06 18:02:40

Technical measures for outsourcing reinforcement

FRP wrap Strengthening; Bond steel plate reinforcement; Steel jacketing reinforcement; Reinforcement of reinforced concrete mortar with surface layer; Reinforcement of reinforced concrete surface layer

2018-06-06 17:33:20

Methods to improve the seismic capacity of structures

Reinforcement of reinforced concrete surface layer; Reinforcement of reinforced concrete mortar with surface layer; Steel jacketing reinforcement; Bond steel plate reinforcement; FRP composite reinforcement

2018-06-06 17:30:23
Back
Top
Close